• Price: $1999 / £1849 / €2042
  • Rating:

Pioneer DJ DDJ-REV7 Serato Controller Review

Phil Morse | Founder & Tutor
Read time: 13 mins
Last updated 30 March, 2023


The Lowdown

The DDJ-REV7 is an innovative flagship DJ controller for Serato and Pioneer DJ, aimed at both scratch/battle DJs and open-format DJs who’d prefer a turntable-inspired system. Its motorised platters are best in class, with unique built-in screens. Its overall size, layout and build quality give it a similar feel to using a pro separates scratch set-up. The niggles are minor – this is a fantastic controller.

Don’t have our 2023 DJ Gear Guide? Click here to grab your free copy

Video Review

First Impressions / Setting up

The DDJ-REV7 is a fairly large controller, although it is still possible to carry it under one arm, just. I’d say it’s the “large end” of medium-sized, but nowhere near as deep, wide or bulky as, say, the XDJ-XZ. It’s relatively shallow, with low-profile rubber pads underneath instead of feet.

It’s quite heavy, due in no small part to the motors built-in to rotate the platters, and feels well built. It has metal-plated top surfaces, and plastic sides and bottom, as is the way Pioneer DJ tends to construct its pro gear. It’s all-black, with a mixture of silver, black, white and grey knobs, buttons, faders and pads.

The decks

The two identical deck sections are dominated by 7” motorised platters, that look like turntables, with tapered, strobe-dotted edges, and “real vinyl” surfaces. The “vinyl”, complete with window to look through to the built-in screens, lifts off, and underneath are plastic discs (“slip sheets”) that do the job of slipmats, allowing the vinyl top surface to behave like real vinyl would on a record deck. These are easily replaceable, and I can see custom sheets (and, indeed, vinyl) coming very soon, either from Pioneer DJ or third parties, for the DDJ-REV7.

Showing slip sheets underneath the DDJ-REV7 platters
Removing the platter to access the “slip sheet” underneath.

It’s a clever design, because it means that – unlike the more traditional-feeling “turntables” on the unit’s biggest competitor, the Rane One – these have no central spindle or locking mechanism, meaning there’s more “hand space”, and of course, room for the built-in screens. They feel highly convincing, too – a must, of course.

Read this next: Platters vs Jogwheels – Which Is Best For DJing?

The other big news here is that Pioneer DJ has gone for “battle” layout – as if you’d turned two turntables 90 degrees, as scratch DJs usually do. (Fun fact: Scratch DJs do this to move the tone arm mechanism into a safer position for scratching.)

Doing so on a real turntable would put the start/stop button on the lower right and the pitch control horizontally at the top, which is exactly where those controls are found on the DDJ-REV7.

GIF demonstrating the jogwheel display options on the DDJ-REV7
Cycling through the various platter display modes, which include waveforms, key, current loop mode, time setting, tempo setting and tempo range setting.

Also at the top of each deck section are a library encoder and buttons, auto loop, slip/censor/key controls, tempo range and tempo reset buttons, and a set of four buttons aligned to a new “Instant Scratch” function, although as we’ll see, they do a lot more than that (more on these later). The decks themselves have inconspicuous pitch bend/waveform zoom buttons, display mode buttons, and stop/start time knobs.

The mixer

Just as the deck sections take their inspiration from turntables set up for scratching, the mixer section takes its inspiration from Pioneer DJ’s iconic two-channel Serato scratch/controller mixers, specifically the current DJM-S7 and its hugely popular predecessor, the DJM-S9.

Bottom third of DDJ-REV7 mixer section
The mixer section has a spacious lower third, to let the fader area shine!

So you get the classic scratch layout: The lower third of the mixer given over to the high quality Magvel Pro crossfader and upfaders, plus just a few other controls tucked out of the way (headphone cue faders/knobs, Smooth Echo – yes, that’s made it across! – and sampler volume).

Learn to scratch with us: Scratching for Controller DJs

The “central” section of the mixer, then, is for the performance pads, which are the same excellent size and quality as found on the DJM-S7. This is also where you’ll find Silent Cue buttons – a nice addition.

Top third of DDJ-REV7 mixer section
The top section hosts both hardware and software effects, and if you’ve used a DJM-S7 (or similar) style mixer, you won’t find many surprises here.

The top section of the mixer again copies the S-series mixers, with effects paddles, control over both built-in hardware effects and Serato’s software effects, and all of the standard volume, EQ and filter knobs, including booth and master knobs. Here you’ll also find the channel switches, letting you choose between up to two laptops running Serato, and phono/line sources (the mixer is also “standalone”, and can work with analogue sources, too.)

The front panel

Along the front of the controller, you’ll find the microphone controls, extra mixer controls, the headphones sockets, and Aux input controls.

For the mixer, there are reverse switches (for both the crossfader and the upfaders), curve adjustment knobs for all three faders, and a mechanical “feeling adjust” knob to tighten or loosen the crossfader.

There are level controls for two mics, plus EQ and echo controls (ganged for both mics), plus a mic on/off/talkover switch. You get both 1/4” and 1/8” headphones sockets, and the Aux controls feature a volume knob, and a three-way switch for off/line/portable (to adjust the input gain depending on what type of auxiliary device you have plugged in).

The back panel

Front and rear view of the DDJ-REV7
Both the front and back panels on the REV7 – their choice to use a supplied power brick instead of an IEC socket was the only disappointment.

From left to right, there are master balanced XLR and unbalanced RCA outputs, booth balanced TRS outputs, the two USB sockets for laptops, then the analogue inputs: Two pairs of RCAs with line/phono switches for the main channels, and a pair of RCAs for the Aux input. There’s no 1/8” jack input for the Aux, despite what the “portable” setting on the front switch might lead you to believe.

Moving to the far right, there are two mic inputs, one an XLR/TRS “omni” input, one a balanced 1/4” TRS-only both with attenuator knobs for balancing the mic levels, depending on the type of mics attached.

The power input is, disappointingly, 24V DC with a supplied power brick. This should have been an IEC socket with the transformer built-in to the unit, as that arrangement is more convenient for the pro user, and would eliminate the potential issue of sourcing a spare power brick if there happened to be any issues with the supplied one when on the road, etc.

There’s also a Kensington lock socket at the back.

Setting Up the DDJ-REV7

The DDJ-REV7 unlocks Serato DJ Pro, so you register for a Serato account on their website, download the software, and you’re ready to go. There’s an Expansion Pack voucher for Serato’s Pitch ’n Time musical key features in the box, and the voucher can’t be reissued, so be sure not to lose it, as you’ll need it to fully activate that software.

It is always worth checking the Pioneer DJ support pages to make sure you are running the latest firmware and updating that on the REV7 if not, and it is also important to update to the latest version of Serato DJ Pro if you are already a user, as the DDJ-REV7 will not be recognised by previous versions of the software. There are audio drivers needed for Windows, and both Windows and Mac need a Setting Utility installed.

The DDJ-REV7 unlocks Serato DJ Pro software, and includes a voucher for their Pitch ’n Time feature.

If you want to plug in external decks, you can do so, and you can even use DVS turntables with this if you wish – although for most DJs, the two built-in platters will be a big part of why they buy this in the first place. Good to know it’s there, though.

Then it’s just a case of attaching any mics you want to use, plugging in your powered monitors or into the club’s mixer, and plugging in your laptop – there’s a supplied cable, although if you want to plug in a second laptop you’ll need a second cable too.

Make sure the channel selector switches are set to the correct laptop input, and you’re good to go.

Worth also pointing out that Pioneer DJ provides a set of stickers that you can use as markers on the control vinyl if you wish to do so – it does have a built in “marker” that displays on the screen, but some DJs may prefer a (guaranteed zero latency) physical sticker!

In Use

General thoughts

If you’ve ever used a pair of decks in “battle” position and a DJM-S7 (or any other) two-channel scratch/battle mixer, you are going to feel uncannily at home on the DDJ-REV7. That’s because it feels just like using that kind of separates set-up.

First, the decks. Turntablists, you’re going to take to them instantly. The feel is just right, the (adjustable) torque is authentic, and if you’re worried about using 7” decks instead of 12” (as per real vinyl, of course, or the Rane Twelves), don’t be – it takes next to no time to adapt.

GIF of DJ Jazzy Jeff scratching on the DDJ-REV7
Jazzy Jeff typically uses Rane Twelves and a DJM mixer in his studio, but we set this controller in front of him and he had it figured out within minutes!

The decks on the Rane One are fantastic, but these feel just as good – and these have the differentiating factor of no central spindle, and built-in screens. As you’ll see in the accompanying video, those screens can show you vertical waveforms, that you can zoom in and out of independently of the software, which is really useful, and they can also show you track timings.

The digital deck marker on the screen does have a tiny bit of latency, maybe the reason why stickers are provided.

Size-wise, the unit is just big enough for you to forget you’re not using separates after a while. Especially for performance DJing, one of the criticisms of controllers is that they’re too cramped, so you’re crouching/hunching to stab at their dinky little controls, and not “spreading out” across the gear as you do naturally with separates. Not so here: The sizing is just right, while still being portable.

This “natural” feel is helped hugely by the mixer not being a cramped after-thought, but instead a faithful reproduction of a DJM-S9/S7. No controller (apart from the budget DDJ-REV1, launched at the same time as this – here’s our review) has ever adopted this layout before. And while it feels just a bit cramped and odd on the DDJ-REV1, here, it works perfectly. Everything is just where you’d expect, meaning, again, you’ll feel right at home.

The two REV controllers are the very first to adopt an S7 style layout.

Of course, this apparent simplicity of design hides a lot of thought from Pioneer DJ’s development team, and the sections above the decks betray that deviation from the gear that has inspired this controller – it’s here where some of the new features hang out (we’re getting to those), but also where you’ll find looping controls. The looping controls are the one bit of this controller that feels a bit forced, and that you’ll have to “learn”. The controls are fine, but the positioning feels a bit unfamiliar at first.

So – overall, the DDJ-REV7 is an instant hit when you start playing on it. It sounds good, it feels good, and the controls are all top quality. Let’s now look at some of the standout individual features of the REV7.

Deck display modes

A bit more detail about these, then, as they’re something completely new to motorised DJ controllers. The waveform modes give you a zoomed-in (adjustable) waveform, plus the whole waveform, and the detailed waveform from the other deck, as well as key, current loop mode, time setting, tempo setting and tempo range setting.

The virtual deck mode is a bit more CDJ-like, which includes more BPM and time/elapsed data at the expense of the waveforms. Or, you can go for an artwork display, or even have your DJ logo displayed – a nice touch.

Instant scratch

Another brand-new feature is Instant Scratch. Pressing the Instant Scratch button at the top of one of the decks lets you load a “scratch loop” for that deck, by pressing one of the four buttons laid out horizontally across the top of the deck, above the platters. Two of these loops are sets of individual, familiar-sounding scratch sounds, the other two are more like looping breaks.

The Instant Scratch section above the platters
The unique Instant Scratch feature allows DJs to practise their scratching with built-in samples.

The purpose is to give you instant access to usable scratch sounds for scratching over something you’re playing on the other deck. But because these sounds are built into hardware, you can use them without even having Serato plugged in.

And because you get a mixture of one shot-type sounds and loops, it is perfectly possible to have a loop playing on one deck, and be scratching over it on the other. This turns the DDJ-REV7 into basically a standalone scratch practice station – and it’s great.

Start scratching like a pro on ANY gear: Scratching for Controller DJs

The downside is that the sounds and loops aren’t “authentic”, insofar as most DJs would probably prefer to be using better-known sounds. They’re close, but not, you know, the sounds we all know and love, and there seems to be no way of switching them out in firmware.

However, all is not lost – because that brings us to the second function of these new buttons.

Extra Serato pad slots

These four small buttons can also be put into use as “extra” pads for Serato, in addition to the performance pads on the mixer section – they call them “Deck Pads”. You can choose hot cue, saved loop, sampler or Scratch Bank – and the latter is pretty much the software version of what I just described anyway, where you can “instant scratch” with your choice of samples, from within Serato.

So effectively you have the eight “main” Serato performance pads, plus these four. Another way you may use these is to set these to trigger four samples, for instance, meaning you’d never have to switch the “main” pads to Sample mode to do so, freeing those up to use for your hot cues, for instance.

Read this next: Beginners Guide To Using Your DJ Software’s Sampler

This is a good feature, especially because you can’t “split” the main pads into two sets of four as you can on some other Pioneer DJ gear.

Middle third of REV7 mixer
There’s no shortage of high-quality performance pads in the mixer section, and DJs get an extra four with the “Deck Pads”.

The performance pads themselves are basically the “full” Serato pad experience – physically they’re full RGB and full-sized, and they control Hot Cues, Loop Roll, Saved Loops, Sampler, Pitch Play, Slicer Loop, Saved Flips, and Scratch Bank. Head to our DJM-S7 and DJM-S11 reviews to learn more about these features (and indeed many of the features mentioned here that have been ported across directly from those hardware mixers).

Extensive hardware and software effects

There are 22 hardware “Beat” effects built-in to the unit, and the Settings Utility mentioned earlier lets you choose what the defaults are – the labelled effects are echo, spin, flanger, reverb, vinyl brake and “Duck Down” (the latter is really cool, and is demoed by me in the review video).

Each effect has an additional parameter, all adjustable from the hardware, helped by the small screen in the middle of the mixer.

One additional effect that isn’t a default but that is well worth seeking out is “Fill Out”, which is like a more creative Transform effect – again, it’s demoed in the accompanying video.

Testing out the new “Duck Down” effect.

With the hardware effects, the chosen effect works across both decks, but with the Serato software effects, you get up to three effects per deck. Again, everything can be adjusted from the mixer. You of course also get the single knob filter per channel, so overall, the unit has a huge range of effects (of all types) for you to play with.

Just as with the DJM-S7, which inspired the mixer section here, you’re not going to be creatively stuck for ideas when it comes to effects.

A wide range of “controller”-type additional features

When DJing with two DVS turntables and a Serato mixer such as the DJM-S7 (and, indeed, even if you’re using Rane Twelve deck controllers with a Serato scratch mixer), you still don’t get all the controls that DJs using top-end, more conventional controllers enjoy.

Not so with the DDJ-REV7. There are a surprising number of additional controls here that make the DDJ-REV7 highly versatile for much more than just scratch DJs. Let’s list some of them:

  • Sync – Yup, it’s present and correct
  • Slip mode – Often left off of “purist” gear, but it’s useful, and it basically lets you scratch, play with cues and so on, without losing your place in the track/mix
  • Censor/reverse – A must-have for event DJs wanting to instantly clean up explicit lyrics, but also a nice performance feature in its own right
  • Key sync, key shift and key lock – Basically, the supplied Pitch ’n Time Expansion Pack plus the hardware controls give you full control over all aspects of key mixing
  • Tempo reset – A turntable feature, very useful creatively and to my knowledge not been featured on any controller before
  • Stop time – Each deck has a control that goes from instant to “cutting turntable power” setting
  • Pitch bend – The unit even has good, old fashioned, pitch bend controls for nudging tracks into time without touching the platters at all

Also worth pointing out that the DDJ-REV7 has “instant start”, like the Rane Twelve/Rane One. Yes, there’s Silent Cue, used by DVS DJs to tighten up timing when starting a deck, but actually, hitting the “start/stop” button appears to start the music instantly anyway, despite “deck drag” as the motor gets up to speed – a useful thing, as there is no temporary cue as found on all other controllers (even the similarly laid out DDJ-REV1).

Pioneer DJ has carved out an easy upgrade path for Serato DJs, going from entry-level, to pro controller, up to full turntables and a mixer.

Lots of fine tweaks in the settings

There is a Utility mode, that you can use the jog display to view and make alterations to all kinds of things with. For instance, you can:

  • Adjust “smooth echo” behaviour – Smooth echo triggers an echo to end a performance routine automatically, and here you can choose what action will trigger it
  • Choose the length of the mic echo – I’d like to have seen a reverb option here too, though
  • Adjust the motor torque – Have the decks “feel” how you like
  • Adjust mic features – Talkover mode/level, low cut, whether the mic goes to the booth monitors, etc
  • Adjust master output features – Limiter, mono/stereo etc
  • Adjust LED and display brightness


So, Pioneer DJ has launched a motorised platter controller! And it’s a hands-down winner. The layout makes perfect sense (battle mode decks, DJM-S9/7 mixer layout), and the decks are both technologically clever, and work really well.

Making this for Serato makes perfect sense, both for DJs (most DJs who scratch use Serato) and for Pioneer DJ’s product range (its own software Rekordbox for club kit, Serato software for scratch/performance kit).

Learn to scratch on ANY system: Scratching For Controller DJs

But because of all the extra features, many of which are highly controller DJ-friendly, the DDJ-REV7 is probably best seen as an all-round party, open-format, scratch, battle, and performance DJ’s controller – equally at home at parties and events, as well as DJ battles.

Pioneer DJ DDJ-REV7 vs Rane One

The DDJ-REV7’s main competitor is the Rane One. That is a smaller, slightly more portable controller, and has a more traditional deck layout that some DJs may prefer (although not many, we feel – the jog displays on the REV7 are cool, and the REV7’s battle mode makes perfect sense).

The Rane One has had zero competition in the motorised platter category, until now..

The Rane One also has a cramped mixer layout in comparison to the REV7, meaning DJs used to using full-sized gear have a bigger learning curve with the Rane One. And, it has fewer features overall than the REV7. The REV7 costs a bit more, but you’re getting more for that extra cash.

Read this next: What DJ Gear Is Worth Spending Extra Money On?


There are a few things we didn’t like, although they’re small. The biggest one is supplying a power brick instead of building the transformer into the unit. This looks cheap. Apart from that, the Instant Scratch sounds aren’t the ones we suspect most scratch DJs would ideally want, and we question the positioning of the loop controls.

But against that, there’s so much to like here, that we think the DDJ-REV7 will do very well indeed. It’s hugely fun to play on, it looks brilliant, it sounds great, and it has lots of innovation built in. As a first “go” at a motorised controller for Pioneer DJ, it’s a stunning success, and we think it’ll do really well.

Want help choosing gear? Grab your free PDF: The Digital DJ Gear Buyer’s Guide

Watch the demo

In this Digital DJ Tips exclusive, our tutor DJ Jazzy Jeff puts the brand-new Pioneer DJ DDJ-REV7 through its paces.

Click here for your free DJ Gear and software guide