Head To Head: Pioneer DJ DDJ-1000SRT Vs DDJ-SX3

Marc Santaromana | Read time: 4 mins
Club/Festival DJing DDJ-1000SRT DDJ-SX3 head to head Pro
Last updated 4 October, 2019


The Pioneer DJ DDJ-1000SRT is one of the hottest DJ controllers on the market and for good reason. It gives the standard Pioneer club layout to Serato users for the first time, allowing them to use a controller similar in feel to the DDJ-1000 for Rekordbox users, and therefore to club CDJs.

But prior to the release of the DDJ-1000SRT, Pioneer DJ had another killer controller in this price range: the DDJ-SX3. At the time of its release the SX3 was itself a big leap in features from its predecessor the DDJ-SX2.

Both controllers are in a similar price range, the DDJ-SX3 retailing at $1099 and the DDJ-1000SRT retailing at $1299, and have similar features, but they do have their differences. Although both controllers feature set is quite similar, the differences between the two may make a DJ want to pick one over the other.


Both of these controllers have mixer sections that mirror the club-standard layout of pro mixers. The pad sections of both controllers follow the standard Serato DJ controller layout. Both the DDJ-SX3 and DDJ-1000SRT have the same eight performance pad modes with eight performance pads per deck so the functionality on either is the same.

The deck sections do however differ outside of the performance pad section. The DDJ-SX3 follows a more traditional Serato DJ deck section layout with Serato DJ effects controls for the three effects in each bank above each deck. The DDJ-1000SRT follows the CDJ style-layout with the looping controls found above the jogwheel.


The DDJ-SX3 added single knob per-channel effects, built in to the hardware, that Pioneer DJ calls “Sound Color FX”. These are four different standalone hardware effects that can be selected and used on each channel. These are controlled using what would normally be the filter knob on most controllers.

The DDJ-1000SRT also includes these effects, but has different effects available. The DDJ-SX3’s are Echo, Jet, Noise, and Filter, while the DDJ-1000SRT has Dub Echo, Pitch, Noise, and Filter.

Other effects outside of these are handled in different ways on these two controllers. As I just discussed, the DDJ-SX3 has onboard controls for the software effects found within Serato DJ Pro. The DDJ-1000SRT on the other hand, does not have any controls for the Serato DJ Pro software effects.

Instead, the DDJ-1000SRT has built-in hardware “Beat FX” which is what you’d find on Pioneer DJ’s more expensive club mixers. These include popular effects such as Echo, Delay, Reverb, and Spiral. The only way to access the Serato DJ software effects if you are using the DDJ-1000SRT is to either use a secondary controller or the mouse. Furthermore, even when you do activate them, they are not post-fader: A definite disadvantage.

Jogwheel Type

One of the big selling points for the DDJ-1000SRT is the use of a mechanical-style jogwheel which is normally found on Pioneer DJ’s media players instead of the capacitive jogwheels the majority of controllers use, the DDJ-SX3 included. If you are used to capacitive jogwheels like the ones found on the DDJ-SX3 it does take a little bit of adjustment to get used to the feel of a mechanical jogwheel.

Dual USB jacks

Dual USBs make it possible for seamless changeovers between DJs or for a laptop to be connected as an emergency backup. One of the biggest and most surprising changes from the DDJ-SX2 to the DDJ-SX3 was the addition of a second USB to allow for two laptops to be connected to the controller at the same time. The DDJ-1000SRT also has dual USBs to allow for two laptops to be connected. Both of these controllers are great choices if you end up playing a lot of gigs with more than one DJ playing for the night.

Serato DJ Pro compatibility

The DDJ-SX3 and DDJ-1000SRT both use the Serato DJ Pro software. It’s one of the most popular DJ software on the planet and for good reason. It’s feature-rich and has proven to be reliable over the years. Both the DDJ-SX3 and the DDJ-1000SRT do not require any additional purchases to access the full Serato DJ Pro software. Both controllers are simply plug-and-play and ready to go.

Four-channel control

In this price range, four channels have become somewhat of a standard. Both the DDJ-SX3 and DDJ-1000SRT’s mixer sections follow the Pioneer club-standard four-channel layout and the decks on both controllers have two layers to control up to four decks. All four channels have RCA inputs so you can have up to four external sources to use, and two of these channels have phono inputs so you can spin with DVS timecode in Serato DJ Pro as well.

Standalone mixer

Apart from DVS compatibility, both the DDJ-SX3 and DDJ-1000SRT can be used as a standalone mixer too. So if you have media players or turntables, you can play those through either of the controllers without a laptop connected. This is a feature that I personally enjoy on any controller as I like to casually listen to vinyl on one of my turntables, and not having to bring out and set up a separate DJ mixer when I already have a controller out is a time saver.

Microphone inputs

While both the DDJ-SX3 and DDJ-1000SRT have two microphone inputs, they are handled differently on each controller. On the DDJ-SX3 you need to give up mixer channels. While this is nice because it gives you more precise EQ control on each of the mic channels, if you like playing with more than two decks in Serato DJ Pro you will not be able to use both microphones at the same time.

With the DDJ-1000SRT, the microphones have their own “channels” with independent volume control and a shared EQ. This means that you do not have to give up a channel in Serato DJ Pro to use the microphones with the DDJ-1000SRT.


Both the DDJ-1000SRT and the DDJ-SX3 are great choices for controllers in their price range. Both Serato DJ Pro controllers have four channels, standalone mixer capability, dual USB, and one-knob effects. The two big differences between these two controllers are the types of jogwheel used on each controller and the ability to control the Serato DJ effects.

If you are interested in getting a more club-standard-like experience, the mechanical jogwheels and on-board hardware effects of the DDJ-1000SRT is going to be more appealing. If you enjoy the flexibility of the Serato DJ Pro software effects and are used and feel more comfortable with capacitive jogwheels, the DDJ-SX3 might be the controller for you.

If you were to get either of these two, which would you pick? Like the club-style layout of the DDJ-1000SRT, or do you like the hands-on Serato DJ FX control and mic inputs of the DDJ-SX3? Let us know below.

Mixing For Mobile & Wedding DJs