You’re Doing The Echo Out Wrong (This Forgotten Button Fixes It)

Beginner DJ? Start Here.

Join now and get your free online mini-course covering gear, music and mixing.

Last updated 19 November, 2026

You’ve probably tried the echo out. You put a one-beat echo on the end of a track, cut it, and drop the next track in from its first beat. It’s a clean way of telling the dancefloor one track has finished and another is starting, and it lets you jump between genres, tempos and energy levels.

But if the two tracks are at different BPMs, I’ll bet you’re doing it wrong.

In the video above I show you the fix, using a feature that’s on nearly all DJ gear but was designed for something else entirely. I demo it both ways between Rosé and Bruno Mars’ “APT.” at 149 BPM and Michael Jackson’s “Billie Jean” at 117 BPM, first the usual way and then with the trick, so you can hear the difference.

Why your echo out drifts

When you set a one-beat echo, your software times the repeats to the BPM of the track you’re echoing.

That’s fine while that track is playing. But drop in a track at a different tempo, and the echoes and the new beat run at different speeds and drift apart.

With “APT.” echoing out at 149 BPM over “Billie Jean” at 117, the repeats fall out of time with the new kick drum straight away. Going the other way is worse: echo out “Billie Jean”, drop a much faster track over it, and the beats clash immediately.

The forgotten feature: Tap

The fix is Tap. On the DDJ-FLX4 I’m using, you hold Shift and press the right-hand Beat button in the Beat FX section (it says “Tap” underneath). Most controllers and mixers have it somewhere.

Tap dates back to when DJ software wasn’t very good at working out BPMs. If your effects sounded wrong, you could tap along to the beat to tell the software the real tempo.

Here, you use it to give the software the “wrong” tempo on purpose. Tap in the BPM of the track you’re about to play, and the one-beat echo on the outgoing track runs at the new track’s speed.

That’s wrong for the old track, but perfect for the new one. When you drop the new track in, the echoes land on its beats, and everything stays tight however far apart the tempos are.

How to do it in a mix

Decide you’re going to do it about a minute before the end of the outgoing track. That’s plenty of time.

  1. Load the next track and listen to it in your headphones.
  2. Hold Shift and tap Tap along with the beat you’re hearing. A few bars is enough, and you’ll see the software lock on to the BPM.
  3. Set your echo to one beat, with the depth turned right up.
  4. At the point you want the old track to stop, hit the echo and cut the old track.
  5. Drop the new track in from its first beat.

Ignore what’s playing in the room while you tap. You’re tapping along to what’s in your headphones.

It lets you get away with more

Because the echo is locked to the new track, you can be bolder.

In the video I echo out the word “Billie” from “Billie Jean”, which isn’t even on a beat. It doesn’t matter. As long as the next track comes in on the beat, nobody minds.

Three tips for better echo outs

Make sure the track you’re bringing in has a strong beat that works over what you’ve echoed out. Otherwise it’ll sound messy, or a bit pointless.

Start with a one-beat echo, and turn the echo depth right up so it repeats lots of times before it fades. Without that long tail, you’ll run out of time to bring the next track in.

Count before you drop the new track in. I let the echo repeat four times and bring the new track in on the fifth, which leaves a bar of just echo. With a faster echo, wait for eight and come in on the ninth.

More FLX4 tricks

I’m using Serato DJ on the DDJ-FLX4 here, rather than Rekordbox, the software it comes with. If you’re a Serato user, here are 5 hidden DDJ-FLX4 Serato features, and if you use Rekordbox, here are 5 hidden Shift button tricks.

Hundreds more tricks like this

All Access gives you every Digital DJ Tips course, now and in the future, with hundreds of tips and tricks like this one to take your DJing to the next level.

Find out more about All Access here.

Black Friday Sale