Forum Replies Created

Viewing 15 posts - 1 through 15 (of 20 total)
  • Author
    Posts
  • Max Maxy
    Participant

    Hi Cameron, following DJ Vintage’s advice you would go RCA from controller to RCA input on the ART converter and output XLR to XLR into speakers. There would be 1x XLR cable per speaker (left and right channel signals) giving you a stereo balanced signal into your speakers. With this setup you will have better sounding and louder output from your speakers and the ability to have the speakers further away from your controller without picking up any electronic interference or humm/buzz.

    in reply to: Teenage school dance gig #2577841
    Max Maxy
    Participant

    As you are one of three DJ’s you probably won’t get more than two hours for your set so make sure you play some bangers straight up and go high energy all set. The biggest mistake is to play more chilled music you would listen to at home, you need to play music for people to dance to. Future house and bounce is probably enough without playing any other genres. As DJ Vintage said :”make sure you have mainstream stuff and “recognizable” tunes”. Obscure tracks you like to listen to at home in the future house and bounce genre’s shouldn’t make the cut, go for popular tunes that you still think are cool and have a danceable beat and/or sing along choruses. Don’t play tunes you hate by any means but go for crowd pleasers. Take about twice the amount of music you will need for two hours so you have some options but don’t get overwhelmed with too much and make sure your DJ software is set to show what songs you have already played. If the other DJ’s play a tune you had planned to use and the crowd love the track the other DJ plays then it’s OK to play a different version/remix an hour or so later.

    in reply to: Seeking Suggestions for Vinyl to DVS #2568201
    Max Maxy
    Participant

    Right there DJ Vintage, I use a controller but also have two turntables and not only are they heavy and awkward to move around but some of the issues that controllers don’t suffer from are: the old skipping on wooden dance floors, wind blowing the tone arm on outdoor gigs, bass feedback vibrating the needle, dirty needles etc. Most gigs I use the DDJ-SX because it’s a lot easier and less hassle. That said turntables are great when they work.

    in reply to: Seeking Suggestions for Vinyl to DVS #2566841
    Max Maxy
    Participant

    The DJM250 mk2 doesn’t work with Serato DJ but comes plug and play ready with included full version Rekordbox DJ. It’s a great option and with Rekordbox you get the complete system with the ability to analyse tracks, set cue points and review tracks on your laptop without connecting all the hardware. All you would need in addition to the mixer is some Pioneer Rekordbox timecode vinyl and your existing turntables, Check these reviews here:https://www.digitaldjtips.com/2017/03/pioneer-dj-announces-djm-250mk2-2-channel-mixer/ , this one http://djtechtools.com/2017/03/01/pioneer-launches-djm-250mk2-two-channel-dvs-dj-mixer/ and this one here: https://djworx.com/rekordbox-dvs-pioneer-dj-djm-250mk2/

    • This reply was modified 6 years, 11 months ago by Max Maxy.
    • This reply was modified 6 years, 11 months ago by Max Maxy.
    in reply to: Seeking Suggestions for Vinyl to DVS #2566241
    Max Maxy
    Participant

    My tip is get the new Pioneer DJM250 MK2 2-Ch DJ Mixer w/ Rekordbox DJ & DVS. You get a great mixer with full Serato DJ & Serato DVS license, all you need is some Serato timecode vinyl to go with that and your turntables and your good to go. As you haven’t put up the specs on your laptop it’s hard to know if it will do the job but if not the purchase I suggest above should allow you a second hand Macbook Air and still stay inside your $1k budget. The DDJ-SX suggested by DJ Vintage doesn’t allow for Serato DVS expansion.

    in reply to: DDJ-SR recording line input problems #2565701
    Max Maxy
    Participant

    If you have a USB conection on your turntable which the new Pioneer ones do, as does Audio Technica and many others you only need to download the new Rekordbox application for free, fire it up, connect your USB from turntable to your computer play some vinyl and Rekordbox will detect the audio source and away you go. Mostly very straightforward unless you want to tweak the auto settings. All this without any hardware except computer, turntable and USB cord.

    in reply to: Battery Powered PA Systems #2554521
    Max Maxy
    Participant

    Yes Fi-Fi, buy second hand powered speakers 2 x 15″ tops and a 15″ or 18″subwoofer are good enough to start with. Mackie Thumps or similar powered speakers are OK for your first PA and your budget of £400 should be enough for a second hand set up. DJ and Sound hire businesses regular sell older PA’s when they start to look a bit old and are a good place to check out, at least they will test them to make sure they are in good working order. Hire a generator for outdoor events as DJ Vintage said and make sure it’s designed to use with electronic equipment and computers. A normal builders generator for power tools is not suitable.

    • This reply was modified 7 years ago by Max Maxy.
    in reply to: DDJ SX or SR..incept date, longevity, Those things? #2551761
    Max Maxy
    Participant

    The DDJ-SX has a standalone mixer and enables you to use your device along with CD players, turntables or other interfaces, with or without having a computer connected. I feel this is the biggest plus for the DDJ-SX over the DDJ-SR as if your software crashes or your computer has issues you can still get sound to your speakers by hooking up your phone or other audio output device on one of the spare channels and still have access to a low pass/high pass filter combo, EQ and up/cross faders. In that scenario the audience would hopefully be none the wiser to the your major dramas. At a pinch you could DJ with 2x iPods/phones using the filter and faders to blend/cut from track to track. The extra channels are also great for having full control over your microphone output sound. The build quality of the DDJ-SX is also superior along with the layout being more spacious and less cramped.

    Max Maxy
    Participant

    wow that was a tricky one, awesome stuff DJ Dexter

    Max Maxy
    Participant

    Yes great advice DJ Vintage, the use of an external sound card and XLR cables is the final answer. DJ Dexter, no hum if you go with that combo.

    Max Maxy
    Participant

    Fair call Todd and good advice to DJ Dexter.
    Cheers, Maxy

    in reply to: Adding Speakers to setup #2540221
    Max Maxy
    Participant

    JBL EON 600 series are fine speakers, stereo will always sound better if you are positioned in the sweet spot for sure.

    in reply to: Adding Speakers to setup #2539971
    Max Maxy
    Participant

    If you want the sound for practising DJ ing or playing for friends through your controller it would be fine, most modern music sounds great with just one speaker and in most big clubs they have mono mode so that the sound throughout the club and all the speakers and club sounds the same and even. If you want to play classical music, jazz or some rock it would sound better in stereo or (two speakers).

    Max Maxy
    Participant

    A professional studio can have desktop computer but it would most likely be a Mac and they would output the sound through a dedicated external sound card via USB and then into the studio monitors. Does your controller (what is it?) have a sound card built in or are you using the PC’s sound card?

    in reply to: Adding Speakers to setup #2539921
    Max Maxy
    Participant

    Yes correct, get some speakers with XLR input so you go from master out XLR on the mixer. XLR will give you a better sound and a more solid physical connection. Best thing is go to a store that lets you listen to the speakers and get the best sounding powered ones that fit your budget. One tip is you only really need one good speaker to get a good sound and that way you can get a decent brand to fit your budget rather than 2x dodgy brand speakers.

Viewing 15 posts - 1 through 15 (of 20 total)